KIT TRASMETTITORE E RICEVITORE XLR WIRELESS PER MICROFONI O COPPIA DI CASSE |
Il sistema wireless per chitarra Xvive U3D è dotato di tecnologia digitale che offre un’incredibile qualità audio, una configurazione semplice ed è estremamente affidabile per qualsiasi musicista gigging. Fornisce una risposta in frequenza di 20Hz-20kHz, quindi sentirai il suono della tua chitarra/microfono/uscita XLR da mixer in modo molto dettagliato con solo 6ms di latenza. Questo sistema wireless funziona con banda ISM a 2,4GHz per trasmissioni cristalline che garantiscono l’integrità del segnale sul palco e copre 30 metri di raggio senza interruzione del segnale. Le batterie agli ioni di litio contribuiscono a rendere il sistema wireless U2 ecologico e può durare fino a 5 ore per carica. Il telaio è realizzato in plastica ABS resistente che resiste ai rigori dei tour ed ai climi più rigidi. Questo wireless è perfetto per qualsiasi pedaliera grazie al suo design semplice e compatto. |
U3D Dual Wireless System for Audio
- Two sets of U3 Wireless Systems, for stereo wireless connections from mixers to powered PA speakers
- Can be used with stereo or multiple mono PA/DJ systems, or two dynamic microphones
- 24-bit /48 kHz digital audio with low distortion and wide frequency response
- Stable 2.4 GHz wireless connection with a range of up to 90 feet
Connect your mixer to your powered PA speakers WIRELESSLY, for faster setup and teardown, and none of the hassles and hazards of cables!
THE SYSTEM
Comprised of two U3 Microphone Wireless System sets, the U3D Dual Wireless System for Audio package is the perfect wireless solution for PA and DJ systems! U3D is easy to use, reliable, great‐sounding and affordable, and it will take the tangle and inconvenience of cables out of your sound system.
Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors.

STEREO WIRELESS
U3D includes two U3 transmitters and two U3 receivers. If you use a stereo PA or DJ system with powered speakers, that means you can make your connections wireless by connecting the left mixer output to the left speaker (using the first U3 set), and the right mixer output to the right speaker (using the second U3 set).


EXTEND AND ADAPT
If the XLR outputs on your mixer are very close together, you can use the included XLR adapter to move one of the U3 Transmitters out of the way of the Transmitter plugged into the next channel. Alternately, you can use an XLR cable of any length (not included) for the same purpose.


Specifications
U3 | |
---|---|
WIRELESS TYPE |
2.4 GHz ISM worldwide open band |
BIT DEPTH / SAMPLE RATE |
24-bit / 48 kHz |
SWITCHABLE CHANNELS |
6 |
SIMULTANEOUS CHANNELS |
6 |
MODE |
Input: Mic / Line |