DHR Series
DHR15
DHR10
General specificationsSpeaker typeFrequency range (-10dB)Coverage areaCrossoverMaximum Output Level (Measured peak, IEC noise@1m)ComponentsLFHFAmplifier classPower ratingDynamicContinuousCoolingPower consumptionPower requirementsA/D D/A ConvertersProcessorsI/O connectorsCabinet materialFinishHandlePole socketRiggingFloor Monitor AngleDimensionsWHDNet weightOptions
DHR15
DHR10
General specifications
Speaker type 2-way, Bi-amped Powered Speaker, Bass-reflex 2-way, Bi-amped Powered Speaker, Bass-reflex
Frequency range (-10dB) 44 Hz – 20 kHz 52 Hz – 20 kHz
Coverage area H90゚ x V60゚ H90゚ x V60゚ (Rotatable)
Crossover 1.8 kHz: FIR-X tuning™ (linear phase FIR filter) 1.9 kHz: FIR-X tuning™ (linear phase FIR filter)
Maximum Output Level (Measured peak, IEC noise@1m) 131 dB SPL 128 dB SPL
Components LF Diameter: 15″ cone, Voice Coil: 2.5″, Magnet: Ferrite Diameter: 10″ cone, Voice Coil: 2″, Magnet: Ferrite
HF Diaphragm: 1.4″, Type: 1″ throat compression driver, Magnet: Ferrite Diaphragm: 1.4″, Type: 1″ throat compression driver, Magnet: Ferrite
Amplifier class Class-D Class-D
Power rating Dynamic 1,000 W (LF: 800 W, HF: 200 W) *1 700 W (LF: 500 W, HF: 200 W) *1
Continuous 465 W (LF: 400 W, HF: 65 W) 325 W (LF: 260 W, HF: 65 W)
Cooling Fan cooling, 4 speeds Fan cooling, 4 speeds
Power consumption 74 W (1/8power), 18 W (Idle) 60 W (1/8power), 18 W (Idle)
Power requirements 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz
A/D D/A Converters 24 bit 48 kHz Sampling 24 bit 48 kHz Sampling
Processors HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF
I/O connectors INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
Cabinet material Plywood Plywood
Finish Durable Polyurea Painting, Black Durable Polyurea Painting, Black
Handle Side x2 Top x1
Pole socket Φ35 mm x2 (Bottom, 0° or -7°) Φ35 mm x1 (Bottom)
Rigging Top x 2, Rear x 1 (Fit for M10 x 30 – 50 mm Eyebolts) Top x 2, Rear x 1 (Fit for M10 x 30 – 50 mm Eyebolts)
Floor Monitor Angle – –
Dimensions W 432 mm (17.0″) 305 mm (12.0″)
H 692 mm (27.2″) (with rubber feet) 494 mm (19.5″) (with rubber feet)
D 405 mm (15.9″) 300 mm (11.8″)
Net weight 24.0 kg (52.9 lbs) 15.0 kg (33.1 lbs)
Options – U-bracket: UB-DXRDHR10